Delete Program; Playback Modes - Schaub Lorenz MC1200 Bedienungsanleitung

1. Before programming, please press STOP
PROGRAM/REPEAT on the unit or PROG/REPEAT on the remote control.
The display shows
number stands for the selected track, the second number for the sequence.
2. Select the desired track with
unit or TUNE+ or
3. Save the track with PROGRAM/REPEAT on the unit or PROG/REPEAT on the remote control. The
display now shows 00 and P-02. Select the next track up to a maximum of 65 tracks.
4. Repeat steps 2 and 3 to program further tracks.
5. Press PLAY/PAUSE on unit or
desired sequence. In program mode the display shows besides track number and the elapsed time
also .

Delete Program

Follow these steps to delete the program:
1. Press OPEN/CLOSE
2. Press FUNC. on the remote control or FUNCTION on the unit to select a different mode.
3. Turning the unit off (standby mode) with
deletes the program.
4. Press STOP on the unit or

Playback Modes

Several playback modes are available on the unit; press PROGRAM/REPEAT on the unit or
PROG/REPEAT or RANDOM on the remote control to access and select.
1. Press PROGRAM/REPEAT on the unit or PROG/REPEAT on the remote control once to repeat the
current track. The display shows besides the previous icons also
2. Press PROGRAM/REPEAT on the unit or PROG/REPEAT on the remote control twice to repeat the
complete CD in the recorded sequence. The display shows besides the previous icons also
3. Press PROGRAM/REPEAT on the unit or PROG/REPEAT on the remote control again to return to
normal playback mode; the display shows as before track number and elapsed playing time.
4. For random playback of all tracks on the CD press RANDOM (only on the remote control). The display
shows besides the previous icons also RANDOM.
5. Press RANDOM on the remote control again to return to normal playback mode; the display shows as
before track number and elapsed playing time.
MP3 CD Playback
Playback of MP3 CDs is very similar to Audio CD playback. Following we show mainly the specifics for
MP3 files.
1. Repeatedly press FUNC. on the remote control or FUNCTION on the unit, until CD is displayed. READ
flashes on the display. If no MP3 CD is inserted, NO DISC is displayed.
2. Press OPEN/CLOSE
3. Insert a MP3 CD, CD-R or CD-RW disc with the label up and press OPEN/CLOSE
the CD compartment. At first CLOSE is displayed for a short moment, afterwards the MP3 CD is read,
CD is displayed and READ flashes during this period. After reading the total number of tracks and the
total playing time is displayed.
4. In case playback does not start automatically (depending on the disc), please press
on the unit or on the remote control to start playback of the first track manually.
5. Press PLAY/PAUSE on the unit or
number the elapsed playing time flashes. Press
control again to continue playback.
6. Press MEM/FOLDER – or MEM/FOLDER (only on the remote control) toskip to the next or previous
album (directory), here you select the desired track as described before.
7. Press id3/FM MODE/ESP on the remote control or ESP/id3/FM MODE on the unit to show the
ID3-tag information. TITLE, ARTIST, COMPOSER and ALBUM are displayed.
8. Press STOP on unit or
numbers and STOP.
32. GB
on the unit or
and below 00 (flashes) and P-01. The first
NEXT/TUNE+ or
TUNE- on the remote control.
on the remote control to start playback of the tracks in your
on the unit to open the CD compartment.
ON/STANDBY on the unit or on the remote control also
on the remote control to delete the program.
on the unit, OPEN is displayed.
on the remote control to pause playback; next to the track
on the remote control to stop playback, the display shows the total track
on the remote control and
BACK/TUNE- on the
.
PLAY/PAUSE on the unit or
.
on the unit to close
PLAY/PAUSE
on the remote