ABSCHNITT 1
1.0
Sicherheitsvorkehrungen
GB
GB
Benutzer von ESAB Schweiß- und Plasmaschneidausrüstung haben die Verantwortung sicherzustellen, dass jede an oder in
Nähe der Ausrüstung arbeitende Person die wichtigen Sicherheitsvorkehrungen beachtet. Diese Sicherheitsvorkehrungen
müssen mit den auf diese Art von Schweiß- oder Plasmaschneidausrüstung anzuwendende Forderungen übereinstimmen.
Folgende Empfehlungen sollten zusätzlich zu den normalen Regeln, die auf den Arbeitsplatz abgestimmt sind, beachtet
werden.
Arc welding and cutting can be injurious to yourself and others. Take precausions when welding.
Arc welding and cutting can be injurious to yourself and others. Take precausions when welding.
Jegliche Arbeit muss von geschultem Personal, welches mit der Bedienung von Schweiß- oder Plasmaschneidausrüstung
Ask for your employer's safety practices which should be based on manufacturers' hazard data.
Ask for your employer's safety practices which should be based on manufacturers' hazard data.
vertraut ist, ausgeführt werden. Die falsche Bedienung der Ausrüstung kann zu Gefahrsituationen führen, die wiederum zu
Verletzungen des Bedieners und Beschädigung der Ausrüstung führen können.
ELECTRIC SHOCK - Can kill
ELECTRIC SHOCK - Can kill
Install and earth the welding unit in accordance with applicable standards.
Install and earth the welding unit in accordance with applicable standards.
S
S
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S
S
Insulate yourself from earth and the workpiece.
Insulate yourself from earth and the workpiece.
S
S
1. Jeder Benutzer von Schweiß- oder Plasmaschneid-Ausrüstung muss mit folgenden Anwendungen vertraut
Ensure your working stance is safe.
Ensure your working stance is safe.
S
S
sein:
FUMES AND GASES - Can be dangerous to health
FUMES AND GASES - Can be dangerous to health
- seiner Bedienung
Keep your head out of the fumes.
Keep your head out of the fumes.
S
S
- der Standort des Notstops
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
S
S
- seiner Bedienung
and the general area.
and the general area.
- den wichtigen Sicherheitsvorkehrungen
ARC RAYS - Can injure eyes and burn skin.
ARC RAYS - Can injure eyes and burn skin.
- Schweißen und/oder Plasmaschneiden
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
S
S
clothing.
clothing.
Protect bystanders with suitable screens or curtains.
Protect bystanders with suitable screens or curtains.
S
S
2. Der Benutzer muss versichern dass:
FIRE HAZARD
FIRE HAZARD
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
- keine unberechtigte Person sich im beim Anlassen im Arbeitsbereich der Ausrüstung befindet.
S
S
- niemand ungeschützt ist, wenn der Bogen gezündet wird.
NOISE - Excessive noise can damage hearing
NOISE - Excessive noise can damage hearing
Protect your ears. Use earmuffs or other hearing protection.
Protect your ears. Use earmuffs or other hearing protection.
S
S
Warn bystanders of the risk.
Warn bystanders of the risk.
S
S
3. Der Arbeitsplatz muss:
MALFUNCTION - Call for expert assistance in the event of malfunction.
MALFUNCTION - Call for expert assistance in the event of malfunction.
- für den Zweck geeignet sein
- frei von Zugluft sein
Read and understand the instruction manual before installing or operating.
Read and understand the instruction manual before installing or operating.
4. Persönliche Sicherheitsausrüstung:
- Tragen Sie immer geeignete persönliche Sicherheitsausrüstung wie Schutzbrille, feuersichere Kleidung,
Sicherheitshandschuhe.
- Tragen Sie keine lose hängenden Gegenstände, wie Schals, Armbänder, Ringe usw, die sich verfangen
könnten oder Brände hervorrufen.
WARNING!
WARNING!
5. Allgemeine Sicherheitsvorkehrungen:
Read and understand the instruction manual before installing
Read and understand the instruction manual before installing
- Stellen Sie sicher, dass das Stromrückleitungskabel richtig angeschlossen ist.
or operating.
or operating.
- Arbeit an Hochspannungsausrüstung darf nur von einem qualifizierten Elektriker ausgeführt werden.
- Eine geeignete Feuerlöschanlage muss deutlich gekennzeichnet und in der Nähe sein.
- Schmierung und Wartung dürfen nicht während des Betriebs der Ausrüstung ausgeführt werden.
CAUTION!
CAUTION!
Anlagen der Klasse A (400V CE) sind nicht für den Einsatz in
Class A equipment is not intended for use in residential locations where
Class A equipment is not intended for use in residential locations where
Wohngebieten vorgesehen, wo die Stromversorgung durch
the electrical power is provided by the public low- -voltage supply
the electrical power is provided by the public low- -voltage supply
das öffentliche Niederspannungsnetz gewährleistet wird.
system. There may be potential difficulties in ensuring electromagnic
system. There may be potential difficulties in ensuring electromagnic
Mögliche Schwierigkeiten können darin bestehen, die elekt-
compatibility of class A equipment in those locations, due to conducted
compatibility of class A equipment in those locations, due to conducted
romagnetische Verträglichkeit von Klasse A-Anlagen in diesen
as well as radiated disturbances.
as well as radiated disturbances.
Gebieten zu gewährleisten, die aufgrund von Leitungs- sowie
Strahlungsstörungen auftreten können.
Do not dispose of electrical equipment together with normal waste!
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
that has reached the end of its life must be collected separately and returned to an
WARNING
WARNING
PROTECT YOURSELF AND OTHERS!
PROTECT YOURSELF AND OTHERS!
VORSICHT
5
SICHERHEITSVORKEHRUNGEN