Yamaha PW45 Originalbetriebsanleitung Seite 49

66 - English
INSTRUMENT AND CONTROL FUNCTIONS
2 Battery capacity indicator
The battery capacity indicator displays an estimate of how
much capacity is left in the battery on an 11-segment
scale.
Battery capacity
indicator
2 Assist power meter
The assist power meter displays an estimate of the assist
Assist
power during riding on an 8-segment scale.
power meter
When the e-Bike Systems are not in operation, none of
the segments of the assist power meter are displayed.
When the e-Bike Systems are operating, as the assist
power increases, the segments of the assist power meter
are added one by one.
2 Clock
Displays the current time in 24 hour format. To adjust the
time, see "Clock and km/mile settings".
The time is displayed constantly, even when the display
unit is turned off or removed from the holder.
Clock
15
INSTRUMENT AND CONTROL FUNCTIONS
2 Function display
The function display can display the following functions.
• Average bicycle speed
Function
• Maximum bicycle speed
select switch
• Trip meter
• Odometer
• Remaining assist distance
• Battery capacity (%)
• Cadence
Function display
Push the function select switch, the display changes as follows:
Average bicycle speed  Maximum bicycle speed  Trip
meter  Odometer  Remaining assist distance  Bat-
tery capacity (%)  Cadence  Average bicycle speed
You can reset the data for average bicycle speed, maxi-
mum bicycle speed and the trip meter by pressing the
function select switch for 2 seconds or longer.
7 Average bicycle speed
This displays the average bicycle speed (in kilometers per hour
or miles per hour) since it was last reset.
When you turn off the power, the data up to that point will re-
main in the display.
To reset the data for the average bicycle speed, press the
function select switch for 2 seconds or longer when the
average bicycle speed is displayed.
7 Maximum bicycle speed
This displays the maximum bicycle speed (in kilometers
per hour or miles per hour) since it was last reset.
When you turn off the power, the data up to that point will
remain in the display.
To reset the data for the maximum bicycle speed, press
the function select switch for 2 seconds or longer when
the maximum bicycle speed is displayed.
7 Trip meter
This displays the total riding distance (in kilometers or
miles) since it was last reset.
When you turn off the power, the data up to that point will
remain in the display.
To reset the trip meter and begin counting a new total,
press the function select switch for 2 seconds or longer
when the trip meter is displayed.
7 Odometer
This displays the total distance (in kilometers or miles) rid-
den while the power was on.
The odometer cannot be reset.
16
English - 67