C) Create Configuration File By Software And Load The Configuration File Created From Software Onto Data Logger; D) Perform Configuration Setting On The Website; Main Screen - Overview - VOLTCRAFT DL-200T Bedienungsanleitung

c) Create configuration file by software and load the
configuration file created from software onto data logger
• Connect the data logger to your computer.
• Start the Voltsoft software and follow the operating instructions in the
software manual (section 6 and choose your supported device).
• Disconnect the data logger from your computer.

d) Perform configuration setting on the website

There are 3 options to open the configuration website:
• Open www.conrad.com in a browser and navigate to the data logger
product page by using the item number (e.g. 1435090 for DL-200T
data logger). Click on the link for the configuration website to open the
website.
• Open http://datalogger.voltcraft.com/ConfigBuilder/index.jsp in a
browser.
• Connect the data logger to your computer. Open the data logger drive
on your computer. Click on the link "Configuration Website.html" to open
the configuration website.

Main Screen - Overview

General
Settings
Choose the desired language for the website by
clicking on the corresponding flag.
Select the model of your data logger. The model
name is mentioned on the packaging and/or
product. Chosen model type will be highlighted
in red.
71