VOLTCRAFT DL-200T Bedienungsanleitung Seite 61

• Do use the device in rooms or at unfavourable ambient
conditions in which there may or could be combustible
gases, vapours or dust. Avoid an operation near:
- strong magnetic or electromagnetic fields
- transmitting aerials or HF generators
since this could affect the measurement.
• Do not cover the sensor openings during use. Do not insert
any objects into the sensor openings.
• Only with properly attached protective cap and completely
shut housing, the product is dust tight and jet water-
protected and can be used indoors and outdoors. The
data logger must not be operated with an open battery
compartment or without the protective cap.
• Battery must be kept out of reach of children. Do not leave
battery lying around, as there is risk, that children or pets
swallow it.
• Correct polarity must be observed while inserting the
battery.
• Battery should be removed from the device if it is not used
for a long period of time to avoid damage through leaking.
Leaking or damaged battery might cause acid burns when
in contact with skin, therefore use suitable protective gloves
to handle corrupted battery.
• Do not disassemble, short-circuit or throw battery into fire.
Never recharge non-rechargeable battery. There is a risk
of explosion!
• Consult a professional if you require assistance with product
operation, safety or connection.
• Maintenance work, adjustments and repairs may be carried
out only by a professional or at a specialist workshop.
61