C) Create Configuration File By Software And Load The Configuration File Created From Software Onto Data Logger; D) Perform Configuration Setting On The Website - VOLTCRAFT DL-260A Bedienungsanleitung

c) Create configuration file by software and load the configuration file
created from software onto data logger
• Connect the data logger to your computer.
• Start the Voltsoft software and follow the operating instructions in the software manual (section 6 and choose your
supported device).
• Disconnect the data logger from your computer.

d) Perform configuration setting on the website

There are 2 options to open the configuration website:
• Open http://datalogger.voltcraft.com/ConfigBuilder/index.jsp in a browser.
• Connect the data logger to your computer. Open the data logger drive on your computer. Click on the link "Configu-
ration Website.html" to open the configuration website.
Main Screen - Overview
General Settings
MEASUREMENT options
PDF REPORT OPTIONS
Other settings
40
Choose the desired language for the website by clicking on the corresponding flag.
Select the model of your data logger. The model name is mentioned on the
packaging and/or product. Chosen model type will be highlighted in red.
Here you select the logging parameters for your data logger.
For further instructions, please refer to "MEASUREMENT" options - "BASIC
SETTING" on page 41 and "MEASUREMENT" options - "ALARM SETTING" on
page 42.
Here you define the content and name of the PDF report.
For further instructions, please refer to "PDF REPORT OPTIONS" on page 43.
Here you can create the configuration file, load a previous setting or restore entries
to default.
For further instructions, please refer to "Other settings" on page 44.