f) Creating/saving the configuration file
• After completing the configuration settings, select "Create configuration" to save the configuration file on your
computer.
• A new window appears to change the configuration file name. Default name is "SetLog". If needed, change the
name of the file.
• Confirm the file name by clicking "Create configuration". Your configuration file will be saved on your computer in
the downloads folder.
g) Transferring the configuration file to the data logger
• Remove the USB protective cap from the data logger.
• Connect the data logger to your computer and wait until it has been recognised as a removable disc.
• Drag and drop the configuration file from the download folder of your computer to the data logger folder to execute
the configuration.
• The green LED indicator light (3) will flash twice if the configuration file has been successfully installed on the
data logger.
• When the data logger is configured, disconnect the data logger from your computer.
h) Checking the configuration settings
• Start mode is based on the configuration setting "Record start condition".
• To check which start mode is enabled, load the existing configuration file into the web interface, check the PDF
report or call up the function menu of the data logger.
• Stop mode is based on the configuration "Logging end condition".
• To check which stop mode is enabled, load the existing configuration file into the web interface or call up the func-
tion menu of the data logger.
• For further instructions on calling up the function menu, refer to chapter "14 b) Calling up the function menu".
48