E) Create Configuration File By Website; F) Load Configuration File Created On The Website Onto The Data Logger; G) Review Configuration Settings - VOLTCRAFT DL-200T Bedienungsanleitung

e) Create configuration file by website

• After performing configuration settings, select "CREATE
CONFIGURATION" to download the configuration file to your computer.
• A new window appears to change the configuration file name. Default
name is "Setlog". If needed, change the name of the file.
• Confirm the file name by clicking "CREATE CONFIGURATION".
Your configuration file has been downloaded/imported to your computer.
f) Load configuration file created on the website onto the
data logger
• Remove protective cap from the data logger.
• Connect the data logger to your computer.
• Drag and drop the configuration file from the download folder of your
computer to the data logger folder to execute the configuration.
• The green LED control light (3) flashes twice, when the configuration file
is successfully installed on the data logger.
• When the data logger is configured, disconnect the data logger from
your computer.

g) Review configuration settings

• Start mode is based on the configuration setting "RECORD START
CONDITION".
• Stop mode is based on the configuration "STOP STYLE".
• You can check which start mode is active, by loading the existing
configuration file into the web interface, in the PDF report or by entering
the function menu of the data logger.
• You can check which stop mode is active, by loading the existing
configuration file into the web interface or by entering the function menu
of the data logger.
78