Measurement" Options - "Basic Setting - VOLTCRAFT DL-200T Bedienungsanleitung

"MEASURE-
MENT" options
"PDF REPORT
OPTIONS"
Other settings

"MEASUREMENT" options - "BASIC SETTING"

Select "MEASUREMENT" in the navigation bar and enter settings in
"BASIC SETTING".
"LOGGER
ID"
72
Here you select the logging parameters for your
data logger.
For further instructions, please refer to
""MEASUREMENT" options - "BASIC SETTING""
on page 72 and ""MEASUREMENT" options -
"ALARM SETTING"" on page 75.
Here you define the content and name of the PDF
report.
For further instructions, please refer to ""PDF
REPORT OPTIONS"" on page 76.
Here you can create the configuration file, load a
previous setting or restore entries to default.
For further instructions, please refer to "Other
settings" on page 77.
Logger ID is a four digit identifier. Enter a number
between 0000 and 9999 e.g. 0014.
Use different logger IDs to identify data loggers with e.g.
different configuration file for different usage.