Intended Use - VOLTCRAFT DL-200T Bedienungsanleitung

3. INTENDED USE

The battery-operated portable data logger DL-200T has an internal
temperature sensor, DL-210TH has an internal temperature/humidity sensor
and DL-220THP has an internal temperature/humidity/air pressure sensor.
Measuring data is recorded automatically at adjustable sampling rates from
1 minute to 24 hours. At most 40,020 measuring values can be saved.
Measured values can be immediate read on the LC display. The data logger
can be configured online or by the included software.
The product is connected to a computer like a regular USB memory stick
and read out there. It automatically generates a graphical report in
PDF format. A long-life lithium battery ensures a long recording time.
With attached protective cap, the product is dust tight and jet water-
protected and can be used indoors and outdoors. Do not use the device if
the housing is not completely shut or if the protection cap is not attached
properly.
Measuring under adverse ambient conditions like dust and flammable
gasses, vapours or solvents is not admissible. The safety instructions must
be followed unconditionally!
This product fulfils European and national requirements related to
electromagnetic compatibility (EMC). CE conformity has been verified
and the relevant statements and documents have been deposited at the
manufacturer.
This product complies with the statutory, national and European
requirements.
For safety and approval purposes, you must not rebuild and/or modify this
product. If you use the product for purposes other than those described
above, the product may be damaged. In addition, improper use can cause
hazards such as short circuiting, fire, etc. Read the instructions carefully
and keep them for future reference. Make this product available to third
parties only together with its operating instructions.
58