Selecting The Source; Wireless Display - Medion LIFE P18072 Bedienungsanleitung

5.6. Selecting the source

PLEASE NOTE!
Please note that when connecting with the
only be recognised if it has been activated in the menu EINSTELLUNGEN, submenu QUELLEN.
 Use the T (SOURCE) button to select the inputs of the connected devices. When the SOURCE menu is open,
you can press the corresponding digit to select the desired source directly.
1. TV
2. EXT1
3. SIDE AV
4. HDMI1
5. HDMI2
6. HDMI3
7. YPBPR
8. VGA/PC

9. WIRELESS DISPLAY

PLEASE NOTE!
If the CEC function is activated, the HDMI1 source could be renamed by the signal source device.
PLEASE NOTE!
You can also make the source selection in source mode using the MODE switch on the device.

Use the direction buttons  to go to the desired source.
 Confirm your selection with the OK button.
5.7. Wireless display
Via wireless display you have the option of playing content from a signal source device (e.g. tablet PC, smartphone, etc.)
via the television. The signal source device must have at least Android version 4.2 installed.
Select WIRELESS DISPLAY as source. The display "Ready for Connection" appears.
You must activate screen mirroring on the signal source device. The signal source device detects the available TV devic-
es with which a connection can be established.
After selecting the TV, a connection is established. The display "Connecting to Wireless Display" appears. Then the TV
will mirror the screen content of the signal source device.
PLEASE NOTE!
Wireless display can only be used if the mobile device supports this feature.
The detection and connection processes differ depending on the programs you use.
Please refer to the operating instructions of your signal source device.
Android-based mobile devices should have the software version 4.2 or higher.
22
(SOURCE) button the source (the connected device) will
TV operation (plays back antenna and cable signals)
Device on the SCART socket
Audio/video input on the side of the device using adapter (AV)
HDMI input 1 (HDMI 1 can be used for CEC/ARC)
HDMI input 2
HDMI input 3
Device on the YPbPr input using adapter (YUV)
Device on the PC input
Playback of content from another signal source device