Connecting A Receiver (Sat, Dvb-T, Decoder, Etc.); Connecting A Dvd/Video Recorder And Sat Receiver; Connecting A Camcorder - Medion LIFE P18072 Bedienungsanleitung

7.7. Connecting a receiver (SAT, DVB-T, decoder, etc.)

There are various options for connecting a receiver (e.g. SAT receiver, DVB-T receiver, decoder, set-top box) to your smart
TV.
With a HDMI cable
 If the receiver has an HDMI output, connect an HDMI cable (not supplied) to one of the HDMI sockets on the smart
TV. No additional cable is required for sound transmission.
Using a component video cable and a 3 x cinch to VGA adapter plug
 If the DVD recorder has YUV outputs (Y Pb Pr), we recommend that you use a component cable (cinch cable, green/
blue/red) (not supplied) and the supplied YUV adapter to connect the player to the VGA connection on the smart TV.
 For sound transmission, connect the supplied AV adapter to the SIDE AV connector and connect a stereo cinch cable
(red and white plugs) to the corresponding sockets on the adapter and the audio outputs on the device.
PLEASE NOTE!
Only use the AV adapter supplied.
With a SCART cable
 Use a SCART cable to connect a receiver to the SCART socket. No additional cable is required for sound transmis-
sion.
With an AV adapter
 Connect the AV adapter to the side AV connector on the smart TV.
 Connect a stereo cinch cable (red and white plugs) to the AV adapter and the audio outputs on the external device.
 Connect a video cinch cable (yellow plug) to the AV adapter and the video output on the external device.
PLEASE NOTE!
Only use the AV adapter supplied.

7.8. Connecting a DVD/video recorder and SAT receiver

If you want to connect a DVD recorder or video recorder and a SAT receiver at the same time, you can do so as follows:
 Connect the receiver as described above.
 Now connect the receiver using a SCART cable plugged into the SCART output on the DVD recorder and the corre-
sponding SCART input on the receiver.
 Connect an antenna cable to the antenna socket on the smart TV and the antenna output on the recorder.
 Connect an additional antenna cable to the antenna input on the DVD recorder and the antenna output on the de-
coder.
 Connect the SAT receiver to the LNB on the parabolic antenna.

7.9. Connecting a camcorder

 Connect the AV adapter cable to the side AV connector on the smart TV.
 Connect a stereo cinch cable (red and white plugs) to the AV adapter and the audio outputs on the external device.
 Connect a video cinch cable (yellow plug) to the AV adapter and the video output on the external device.
PLEASE NOTE!
Only use the AV adapter supplied.
26