Installation Menu - Medion LIFE P18072 Bedienungsanleitung

8.2.5. Installation menu

Menu Item
AUTOMATIC
CHANNEL SCAN
MANUAL CHANNEL
SCAN
NETWORK
CHANNEL SCAN
ANALOGUE FINE
TUNE
SATELLITE
SETTINGS
INSTALLATION
SETTINGS
FIRST TIME
INSTALLATION
Installation
Automatic channel scan
Manual channel scan
Network channel scan
Analogue fine tune
Satellite Settings
Installation Settings
First time installation
Setting
The automatic channel search function helps you to search for and save new channels
on your TV.
A number of search options are available.
Once you have selected the search option, press OK. Confirm the query with JA and
press OK to start the channel search.
Press MENU to cancel the search prematurely. In this case, any found channels will not
be saved.
This function is used for the direct entry of channels or satellite transponders.
Selection between digital cable or DVB-T channel groups. This searches for related
channels of the currently selected station. The information sent in this respect depends
on the selected channel and leads to different results
PLEASE NOTE!
The existing channel list is replaced when the network search is started.
Here you can fine-tune analogue channels.
SATELLITE Display satellite list.
LIST
Press the yellow button to add a new satellite.
To delete a satellite from the list, press the blue button.
Press the OK button to edit the selected satellite.
ANTENNA In this section, you can change the antenna settings and search
INSTALLATION satellites for new channels.
SATCODX This menu item allows you to export or import the existing sat-
ellite list. Connect a removable storage medium (USB stick) in or-
der to save the satellite channel list onto it.
Here you can make additional installation settings.
STANDBY If this function is set to ON, the TV will search for available chan-
SEARCH
nels while it is in standby mode. If the device finds any new or
not yet stored channels, a menu appears in which you can ac-
cept or reject the changes.
This function corresponds to the initial installation steps that occur after switching on
for the first time.
PLEASE NOTE!
Carrying out the first-time installation again will reset all settings back to fac-
tory defaults, including the PIN.
EN
41