Medion LIFE P18072 Bedienungsanleitung Seite 101

Menu Item Settings
NETWORK/
INTERNET
SETTINGS
NETWORK TYPE
PRESS WPS ON
YOUR WLAN
ROUTER
(only for WLAN)
INTERNET
SPEED TEST
ADVANCED
SETTINGS
.
ACCESSIBIL- Here you can adjust the settings for visually or hearing impaired users, in order to be able to re-
ITY ceive additional supporting signals.
HARD OF
HEARING
AUDIO
DESCRIPTION
38
PLEASE NOTE!
If you did not agree to the MEDION® Smart TV privacy policy during initial installa-
tion, you will be prompted again to do this here. Otherwise, you will not be able to
use the network/Internet services.
Here you select the network type:WIRELESS DEVICEor
WIRED DEVICE. After making a selection with the direction but-
tons 34 and confirming with the OK button, an overview of all availa-
ble networks appears. Make a selection and confirm with the OK but-
ton. If a password is required for a network, a virtual keyboard appears
which you can use to enter this with the help of the direction buttons
 and the OKbutton. After entering the password, select
OK on the keyboard and confirm with the OKbutton.
This option allows quick WPS connection via a wireless network
(WLAN).
Press the OK button in order to test the speed of the Internet connec-
tion.
Press the OK button to call up further network configuration options.
CONFIGURATION
CONFIGURATION
PLEASE NOTE!
An existing network connection can be terminated by pressing the red button.
If the channel broadcasts special audio signals for the hearing im-
paired, you can change the setting to ON to receive these signals.
If the channel broadcasts special audio signals for the visually im-
paired, you can change the setting to ON to receive these signals.
Choose the settingAUTOMATIC IP
orMANUAL IP. If you select MAN-
UAL IP, three additional lines appear
in which you can manually enter the
data for the IP ADDRESS,SUBNET
MASKandDEFAULT GATEWAY
using the direction buttons and the
number buttons.
Select here between AUTOMATIC
DNS and MANUAL DNS.If you se-
lect MANUAL DNS, two additional
lines appear in which you can manually
enter the data for the DNS SERVER 1
andDNS SERVER 2 using the direc-
tion buttons and the number but-
tons.