Faults - Kärcher SE 4001 Bedienungsanleitung

No water exiting from nozzle
 Fill up fresh water reservoir.
 Check the fresh water reservoir for cor-
rect fit.
 Detergent pump defective, contact Cus-
tomer Service.
Spray stream uneven
 Clean the spray nozzle of the spray ex
floor nozzle.
Insufficient vacuum performance
 Close the surrounding air separator at
the handle.
See diagram 11
 Accessories, suction hose or suction
tubes are clogged, please remove the
obstruction.
 Filter bag is full, insert a new filter bag
(for the order no. please see the spare
parts list at the end of the present in-
structions).
 Cleaning the foam filter
Detergent pump noisy
 Fill up fresh water reservoir.
Appliance is not running
 Plug in the main plug.
 The overheat alarm has been triggered,
please allow appliance to cool down.
18

Faults

Karcher (UK) Limited operate a helpline al-
lowing customers to discuss any problems
experienced with our products.
The helpline operates during normal busi-
ness hours, if you have difficulty getting
through, please understand that there are
peak periods during the day when our con-
sultants are unable to take all calls coming
in. In these circumstances we would ask
that you try to contact us again later in the
day.
The helpline number is 01295 752200,
open from 8.30am to 5.00pm Monday to
Friday.
It helps us if you have the model number
and data plate details to hand before mak-
ing your call.
Alternatively you may write or E-mail to
the address below:
Karcher (UK) Limited
Karcher House
Beaumont Road
Banbury
Oxon, OX16 1TB
E-mail:
info@karcher.co.uk
– 11
EN
Helpline