Inhaltsverzeichnis
Werbung
8
INF8-C PROGRAMMIERUNG
Operating.
1.
Open IFACE
IFACE mode is set after downloading
'P' + <CR> + <LF>
or
addr+'P' + <CR> + <LF>
Inf8 return
IFACE#aa<CR>LF>
Notice 1:
#aa is a string of an integer number, which represent the address of INF8.
For RS232 equal zero, for RS 485 between 01 and 32
If downloading, addr represent the address of INF8, which communicate on RS485.
addr is 1 byte, which is computed as #aa+128.
For RS232 no addr byte is send.
2.
Close IFACE
Meas mode is set after downloading
'E' + <CR> + <LF>
Inf8 return
MEAS#aa<CR>LF>
#aa is a string of an integer number, which represent the address of INF8.
For RS232 equal zero, for RS485 between 01 and 32
3.
Up load number (In IFACE mode only)
Send command and numbers from Tab1.
INF8 sends the answer immediately after <LF> (see Tab1):
PROM#aa #bb #num<CR>LF>
#aa is a string of an integer number, which represent the address of INF8.
For RS232 equal zero, for RS485 between 01 and 32
and #num is a string of the requested real number such as 1.23456 etc.
4.
Down load number (In IFACE mode only)
Send command and numbers from Tab1.
INF8 sends the answer immediately after <LF> (see Tab1):
PROM#aa #bb #num<CR>LF>
#aa is a string of an integer number, which represent the address of INF8.
For RS232 equal zero, for RS485 between 01 and 32
and #num is a string of downloaded number such as 1.23456 etc.
5.
Up load select (In IFACE mode only)
Send command and select from Tab1.
INF8 sends the answer immediately after <LF> (see Tab1):
MENU#aa #bb #sel<CR>LF>
#aa is a string of an integer number, which represent the address of INF8.
For RS232 equal zero, for RS485 between 01 and 32
and #sel is a string of requested integer number such as 12 etc.
3 Byte for RS232
3 Byte for RS485
3 Byte
21
Werbung
Inhaltsverzeichnis
