Operation; Power Supply - OK. OWR 300-B Gebrauchsanweisung

eN

OPERATION

Aerial adjustment
For optimal reception, extend the antenna, move to fully extend and adjust it.
1

POWER SUPPLY

If operation by mains power is not possible the radio can be powered by batteries.
2
Operation by mains
Connect plug to suitable mains socket.
Operation by batteries
1. Open the battery compartment.
2. Insert 4 x 1.5 V battery (type LR03/AAA, not included). Make sure the polarity is correct as indicated.
3. Close the battery compartment.
Switch on appliance
Press the STANDBY button to turn the unit on.
3
Adjusting the volume
The volume can be adjusted during playback with the volume control.
4
Select operation mode
If the radio is switched on you can select the desired mode DAB+, FM radio or Reset by pressing
5
MODE button.
DAB-RADIO
When the radio is switched on for the first time, it will automatically do a full scan of DAB/DAB+
6
stations. The list of stations is then stored, eliminating the need for another full scan when the radio
is turned on next time.
When the scan is complete, the stations are stored in alphabetical order. The first available station
will be played back.
Note
• If there is no DAB reception at any time, change the position of the unit or adjust the antenna.
Press Scan to start a new search.
• New stations and services are added to the stored DAB/DAB+ stations. In order to make new
DAB/DAB+ stations and services available on your radio, run a full scan at regular intervals.
Changing DAB stations
Push the TUNE+/– buttons in DAB mode to navigate available DAB stations.
7
IM_OWR300-B_150129_V03_HR.indb 20
20
30/1/15 10:52 AM