Playing Files Stored On Sd/Sdhc Memory Cards; Playing Networked (Lan) Files - Ecler DUO-NET Bedienungsanleitung

5.1.2. Playing files stored on SD/SDHC memory cards

Insert a SD/SDHC card containing audio files in the slot (2). Then select PLAYER A or B (keys 5
or 6) to playback the content. By default, the F2 key (11) is assigned to SD/SDHC card content
playback. So you just have to press F2 to access content stored on the card. The display shows the
selected media (SD). Press  in the transport bar (10) to start playing content. The LED next to the
SD/SDHC card slot starts flashing (blue) indicating that an audio file on this media is played back. You
can check the audio output from the selected player by looking at the level meter (vertical bar) on the
display of the corresponding player.
Turning the CONTROL digital encoder (8) adjusts the volume of the selected player. Pressing it
mutes (MUTE ON) the player.
By default, the display shows summary information for both players. Pressing once a player key
(5 or 6) gives you access to detailed information about the current playback. Pressing it a second time
leads you to another level of information. Pressing it a third time returns to the screen with information
concerning both players (A and B).

5.2. Playing networked (LAN) files

The DUO-NET PLAYER can playback audio files from remote devices on the same local network
(LAN). To access these files, you must previously create one or more playlists using EclerNet Manager
application. Please refer to the EclerNet Manager manual for more information on how to create playlists
on networked devices.
Once playlists are created, the DUO-NET PLAYER gives you local access to such content. To
access them, first make sure the DUO-NET PLAYER is connected to the same local network as the
device the content is stored on. Then select the player A or B where to load the playlist (keys 5 or 6).
Next press the selected player key again to access detailed information. At this point, press the MENU
key (9). Within the PLAYER menu, select LOAD PLAYLIST. To do this, press the digital encoder (8).
Turning the encoder allows to browse the 99 playlists a DUO-NET PLAYER can memorize*. Select the
desired playlist by pressing the encoder. Press  to start playing content. Press MENU EXIT to exit
the menu.
*The DUO-NET PLAYER locally stores Internet or local network addresses. It never stores audio
content.
Loading a playlist
9