Crossfade; Remote Control - Ecler DUO-NET Bedienungsanleitung

•
FADE MODE: transition mode between audio tracks inside the playlist.
o NO FADE: transition without fades. Once a track ends, the next track in the playlist starts
playing.
o CROSSFADE: the transition between tracks progressively reduces the volume level of the
ending track as the next track volume level gradually increases, merging both tracks for a
short time until the starting track reaches its nominal volume level.
o FADE: the outgoing track fades out. After this, the next track fades in until it reaches its
nominal volume level. There's no crossfade between tracks.
o HALF-FADE: the transition between tracks progressively reduces the volume of the ending
track as the next track starts playing at its nominal volume level before the outgoing track
reaches its minimum value.

6. REMOTE CONTROL

The DUO-NET PLAYER includes an IR (infrared) remote control to facilitate user
management. This remote control is divided into 2 sections: PLAYER A and PLAYER
B, both being identical, except that they control their respective player.
•
ON/STBY: turns off the display. All LEDs and keys also turn off except the
selected PLAYER (A or B). Pressing it again turns on the display and the
LEDs.
•
F1-F5 keys: programmable through EclerNet software. Refer to the EclerNet
manual for more information.
•
SRC: repeatedly pressing it cycles through the first five playlist memories (1, 2,
3, 4, 5, 1, 2, 3, 4, 5, 1, etc.) of the DUO-NET unit to select the playback source.
•
INFO: to navigate through the different information screens about the player (A
or B).
•
VARISPEED: changes the tempo of the playing track (S + to increase the
tempo,> S < to restore the original tempo and S- to decrease the tempo).
•
Transport keys (PLAY/PAUSE/STOP/REW/FF): similar to the front panel keys.
•
VOLUME: increases or decreases the player volume level.
•
MUTE key: mutes the player.
12
Player menu