PeakTech 5200 Bedienungsanleitung Seite 15

The battery is low and should be replaced
immediately
Wood moisture measurement mode is selected. In
this mode you can measure the moisture level of
sawn timber, paper or cardboard.
Material moisture measurement mode is selected. In
this mode, you can measure the moisture level of
hardened material (mortar, concrete or plaster)
Percent (unit of moisture)
Celsius degree
Fahrenheit degree
The present reading has been locked
5. Operating Instruction
1. Press the key once to turn on the instrument.
2. Selecting the desired Measurement Mode:
a.) After the instrument has been turned on, press and hold
down the "ON/SET" key for about 3 seconds to enter
"Setting mode". The reading disappears and only the
corresponding symbol starts flickering on the display.
b.) While function symbol is flickering on the display, press
the "ON/SET" key to select the desired measurement
mode, the corresponding symbol will flicker on the display.
-14-