Renishaw RMP600 Handbuch Seite 19

1
Key to the symbols
LED short flash
LED long flash
Deflect the stylus for less than 4 seconds
to move to the next menu option.
Deflect the stylus for more than
4 seconds to move to the next menu.
To exit, leave the stylus untouched for
more than 20 seconds.
!
CAUTION: Do not remove the batteries
whilst in configuration mode. To exit, leave the
stylus untouched for more than 20 seconds.
Placing the probe in configuration mode
2
> 5 s
3
LED check
8
Deflect the stylus and hold it
deflected until after the battery
status has been displayed at the
end of the review sequence.
Battery good
To change the switch-on method,
3
Battery status
Battery low
or
go to the next page.
1-13