Specifications; Standard Accessories; Battery Removal/Installation - Hitachi dv 18dsfl Bedienungsanleitung

English
CAUTION
1. If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.

SPECIFICATIONS

POWER TOOL
Model
No-load speed (Low/High)
No-load impact rate (Low/High)
Brick
(Depth 30 mm)
Wood
Drilling
(Thickness 18 mm)
Capacity Metal
(Thickness 1.6 mm)
Machine screw
Driving
Wood screw
Rechargeable battery
Weight
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

1 Plus driver bit (No.2) .................... 1
2 Charger (UC18YGSL) ...................... 1
DV18DSFL 3 Battery (BSL1815) ............................ 2
4 Plastic case ....................................... 1
5 Battery cover .................................... 1
1 Plus driver bit (No.2) .................... 1
2 Charger (UC18YGSL ) ..................... 1
3 Battery (BSL1415) ............................ 2
DV14DSFL
4 Plastic case ....................................... 1
5 Battery cover .................................... 1
Standard accessories are subject to change without notice.
9
DV14DSFL
0 – 400 / 0 – 1500 min
0 – 5600 / 0 – 21000 min
8 mm (diameter) × 50 mm (length) 8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
BSL1415: Li-ion 14.4 V (1.5 Ah 4 cells)
1.6 kg
UC18YGSL
14.4 – 18V
0.4 kg
WARNING
If a conductive foreign matter enters in the terminal
of lithium ion battery, the battery may be shorted,
causing fire. . When storing the lithium ion battery,
obey surely the rules of following contents.
Do not place conductive debris, nail and wires
such as iron wire and copper wire in the storage
case.
To prevent shorting from occurring, load the
battery in the tool or insert securely the battery
cover for storing until the ventilator is not seen
(See Fig. 1).
–1
–1
13 mm
32 mm
13 mm
6 mm
BSL1815: Li-ion 18 V (1.5 Ah 5 cells)
OPTIONAL ACCESSORIES (sold separately)
1. Battery (BSL1415)
(For DV14DSFL)
2. Battery (BSL1815)
(For DV18DSFL)
Optional accessories are subject to change without notice.
APPLICATIONS
Drilling of brick and concrete block, etc..
Driving and removing of machine screws, wood
screws, tapping screws, etc..
Drilling of various metals.
Drilling of various woods.

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch
(2 pcs.) to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When the power cord is connected, the charger's
pilot lamp will blink in red. (At 1-second intervals).
DV18DSFL
0 – 400 / 0 – 1500 min
0 – 5600 / 0 – 21000 min
13 mm
38 mm
13 mm
6 mm
(Requires a pilot hole)
1.7 kg
–1
–1