Cleaning Under Running Water; Storage; Disposal - Silvercrest SLS 3 A1 Bedienungsanleitung

Long-hair trimmer attachment
■ Rinse the long-hair trimmer attachment
Housing
■ Clean the housing with a moist cloth.

Cleaning under running water

1) Press the two release buttons
appliance.
2) Hold the shaving head
appliance so that the shaving head
This allows the water to drain off and prevents it from getting into the appliance.
CAUTION! MATERIAL DAMAGE!
Hold only the shaving head
be damaged irreparably if it is held under running water.
3) Allow the shaving head
4) Replace the shaver unit
is seated firmly.

Storage

■ Always replace the long-hair trimmer attachment
when you are not using the appliance. This protects the shaver unit
■ Store the cleaned and dried appliance and its accessories in the supplied
storage bag
■ Store everything in a clean, dust-free and dry place.

Disposal

Do not dispose of the appliance in your normal domestic
waste. This product is subject to the provisions of
European Directive 2012/19/EU.
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility. Please comply with all applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Used batteries may not be disposed of in household waste. Consumers
are legally obliged to dispose of (rechargeable) batteries at a collection
point in their community/city district or at a retail store. The purpose of this
requirement is to ensure that batteries are disposed of in an environmentally
friendly manner. Only dispose of batteries when they are fully discharged.
The packaging is made of environmentally friendly materials which you can
dispose of at your local recycling centre.
SLS 3 A1
and pull the shaver unit
under running water. Make sure that you hold the
under running water. The shaver handset can
to dry.
on the shaver. Ensure that it snaps into place and
.
under running water.
is angled downwards.
onto the shaver unit
GB │ IE │ NI
upwards off the
.
│
9 ■