Zipper ZI-RTS700 Originalbetriebsanleitung Seite 26

MAINTENANCE, CARE AND STORAGE
1 Solve table backup on both sides (Fig. C).
2 Slide the table is hidden all the way forward until the blade completely under the blade guard
(Fig. D).
3 Now, the table can tilt backwards (Fig. E).
4 Remove then the saw blade as shown in Figures F - K shown and insert the new blade in re-
verse order again.
Do NOT use saw blades made of high speed steel (HSS).
Use only saw blades according to EN 847-1 standard with production specification and
dimensions that meet the requirements that are placed on the saw blade. Make sure that the
blade sharpened and is always limited.
4
Z.I.P.P.E.R Maschinen Austria www.Zipper-maschinen.at Seite26
Rolltischsäge / Roll table saw ZI-RTS700