Herunterladen Inhalt Inhalt Diese Seite drucken

Hitachi C 6SS Bedienungsanleitung Seite 11

Vorschau ausblenden Andere Handbücher für C 6SS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without
prior notice.
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling instruc-
tion, to a Hitachi Authorized Service Center.
NOTE
Due to HITACHI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN 60745 and declared in accordance with ISO 4871.
C6SS
Measured A-weighted sound power level:
Measured A-weighted sound pressure level:
Uncertainty KpA:
C7SS
Measured A-weighted sound power level:
Measured A-weighted sound pressure level:
Uncertainty KpA:
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Cutting chipboard:
C6SS
Vibration emission value
2
Uncertainty K = 1.5 m/s
C7SS
Vibration emission value
2
Uncertainty K = 1.5 m/s
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
106 dB(A)
95 dB(A)
3 dB(A)
106 dB(A)
95 dB(A)
3 dB(A)
a
2
h = 2.4 m/s
a
2
h = 5.9 m/s
WARNING
The vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the tool is used.
To identify safety measures to protect the operator
that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts
of the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).
English
10

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

C 7ss

Inhaltsverzeichnis