Before Startup En - Kärcher BR/BD 530 BAT Bedienungsanleitung

Operator console
1 Water quantity regulator
2 Switch for brush operations
3 Switch of suction turbine
4 Display
Before Startup
Fasten the pushing handle using the
four screws that have been delivered
and fit the protective caps.
Place long lateral boards of the packag-
ing as a ramp next to the pallet.
Fix the ramp on the pallet with nails.
Place short boards as a support under-
neath the ramp.
Remove the wooden bars in front of the
wheels.
Raise the cleaning head and remove
the cartonage.
Push down the appliance through the
ramp from the pallet.
22
Unloading
Installing the Vacuum Bar
Insert the vacuum bar into the vacuum
bar suspension in such a manner that
the profiled sheet is positioned above
the suspension.
Tighten the cross-handles.
Insert the suction hose.
Installing the Brushes
BD 530 BAT/Package and/ or
BD 530 XL BAT/Package
The sweep brushes must be installed be-
fore the initial operation (see "Maintenance
work").
Please observe the following warning notes
when handling batteries:
Observe the directions on the bat-
tery, in the instructions for use
and in the vehicle operating in-
structions
Wear eye protection
Keep children away from acid and
batteries
Danger of explosion
– 4
EN
Batteries