Siemens Kompakt PLUS Betriebsanleitung Seite 177

06.2006
Fig. 6-3
The shield can be connected through a PG or metric gland (nickel-
plated brass) with a strain relief bar. Thus, the degree of protection IP
20 can be achieved.
For higher degrees of protection (up to IP 68), there are special PG
glands with shield connection, e.g.:
♦ SKINDICHT SHVE, Messrs. Lapp, Stuttgart
♦ UNI IRIS Dicht or UNI EMV Dicht, Messrs. Pflitsch, Hückeswagen
It is not permissible to use plastic motor terminal boxes!
Fig. 6-4
Siemens AG 6SE7087-6KP50
SIMOVERT MASTERDRIVES
Motor terminal box
Shield connection at the motor
Shield
clamp
Connecting the signal cable shields for SIMOVERT MASTERDRIVES
Operating Instructions
Installation in Conformance with EMC Regulations
PG gland
Cable con-
nector
6-5