Technical Information; Environment Concerns - AEG FAVORIT 55420 W0P Benutzerinformation

30 www.aeg.com
3. Press and hold, at the same time,
Multitab and Delay until the indica-
tors
4. Press Delay.
• The indicators
• The indicator
flash.
• The display shows the current set-
ting of the rinse aid dispenser.

11. TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.

12. ENVIRONMENT CONCERNS

Recycle the materials with the
symbol
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
, , and start to flash.
and
continues to
Width / Height / Depth
(mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
1)
Cold water or hot water
Place settings
Left-on mode
Off-mode
. Put the packaging in
5. Press Delay again and again to
go off.
change the setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
Off
On
446 / 850 / 610
(0.5 / 0.05 ) / (8 / 0.8 )
2)
220-240 V
50 Hz
max. 60 °C
9
0.10 W
0.10 W