Technical Information; Environment Concerns - AEG GS60AIS222 Benutzerinformation

66 www.aeg.com
penser and use rinse aid together with
the combi detergent tablets.
Refer to 'HINTS AND TIPS' for
other possible causes.
Activating the rinse aid
dispenser with the multitab
function activated
The appliance must be in setting
mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
1. Make sure that the programme mark-
er on the programme knob is aligned
with the off position.
2. Press and hold Multitab. At the same
time turn the programme knob coun-
terclockwise until the programme
marker is aligned with the first pro-
gramme on the control panel.

11. TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.

12. ENVIRONMENT CONCERNS

Recycle the materials with the
symbol
applicable containers to recycle it.
Width / Height / Depth
(mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
1)
Cold water or hot water
Place settings
Left-on mode
Off-mode
. Put the packaging in
3. Release Multitab when the display
shows the setting of the water soften-
er.
4. Turn the programme knob counter-
clockwise until the programme mark-
er is aligned with the second washing
programme on the control panel.
5. The display shows the setting of the
rinse aid dispenser.
6. Press Multitab to change the setting.
7. To confirm the setting, turn the pro-
gramme knob until the programme
marker is aligned with the off posi-
tion.
596 / 818 - 898 / 570
(0.5 / 0.05 ) / (8 / 0.8 )
2)
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
Off
On
220-240 V
50 Hz
max. 60 °C
12
0.99 W
0.10 W