Overheating Protection Facility; Rating Plate - Caso Master P1 Original Bedienungsanleitung

14.2.3

Overheating Protection Facility

14.2.4

Rating plate

caso Master P1
The appliance is equipped with an overheating protection facility.
If the temperature of the appliance exceeds the critical limit the
appropriate error message (E05) is displayed and an acoustic
signal sounds. For safety reasons the appliance shuts off further
power supply. Please pull the power plug in order to reset the
device. After the cooling-down phase the appliance can be
switched on again.
► Do not place any empty cookware on the cooking area.
Heating an empty pot or pan activates the overheating
protection and the device turns off automatically.
In case of "E05" appears in the display the overheating protection
has been activated.
This means that the temperature had increased to a
temperature of 170°C. In this case the device turns off
automatically in order to avoid damages.
Therefore we recommend to select the function "Power stage"
in case of steaming food or boiling water for example.
In case of grilling or cooking deep fry food we would advise you
to use the function "Temperature" as in this case you can use
temperatures up to 240°C.
The rating plate with the connection and performance data can
be founded on the back of the device.
Design and Function
49