Installation - Bosch HBN 9652 Gebrauchsanleitung Und Montageanleitung

Installation of the built-in oven
To burn-in the insulation, heat up the
oven prior to installing the unit.
Push the built-in oven into the
installation roughing of the conversion
cabinet and align the unit until it is in
a level position.
Open the oven door and, using one
screw on each side, fasten the built-in
oven to the side strips of the conversion
cabinet (see illustration).
The two screws (supplied with the built-
in oven) must be started slightly
outward.
Verify that the built-in oven is positioned
securely and in a level position, and
that the required installation dimensions
have been maintained.
The properly installed appliance must be
covered on all sides in such a fashion
that not even components with rough
insulation are exposed to the touch. The
cover must be removable with tools
only.
62
Assembly Instructions
min.
894
min.
878
3
min.