Function Selector; Sensors And Display Panel; Sensors To Change The Set Values; Inside The Oven - Blaupunkt 5BD3..50 Serie Gebrauchsanleitung

Function selector

Use the function selector to set the type of heating.
Position Application
Off position The oven is switched off.
Û
Rapid heat up The oven reaches the set temperature
J
extremely quickly.
3D hot air For cakes and pastries. It is possible to
›
bake on three levels. A fan on the back
wall of the oven distributes the heat
evenly in the cooking compartment.
Hot air eco* For cakes, pastries, frozen products,
‰
joints and fish, on one level without pre-
heating. The fan distributes the heat
evenly in the cooking compartment and
therefore ensures energy is consumed
optimally.
Top and bottom For cakes, bakes and lean joints of
%
heat* meat, e.g. beef or game, on one level.
The heat is emitted from above and
below.
Pizza setting For quick preparation of frozen food
œ
without preheating, e.g. pizza, chips or
puff pastry. The heat is emitted from
below and from the fan on the back wall
of the oven.
Hot air grilling For roasting meat, poultry and whole
#
fish. The grill heating element and the
fan switch on and off alternately. The fan
distributes the grill heat evenly around
the food.
Grill, large area For grilling steaks, sausages, bread and
$
fish. The whole area below the grill ele-
ment becomes hot.
Grill, small area For grilling small amounts of steaks,
%
sausages, bread and fish. The centre
part of the grill heating element
becomes hot.
Bottom heat For preserving, browning and the final
$
baking stage. The heat is emitted from
below.
Self-cleaning For automatic cleaning of the cooking
V
compartment. The oven is heated until
the dirt is burnt off.
Light For switching on the oven light in the
N
cooking compartment.
* Type of heating used to determine the energy efficiency class
in accordance with EN 60350.
When the type of heating is set,
panel.

Sensors and display panel

The sensors are used to set different functions. The set values
are shown on the display panel.
Sensor
ºC Temperature
Time functions
0
Minus
A
Plus
@
The symbol for the time function activated lights up on the
display panel.
AA appears in the display
Sensor function
Select the temperature and grill
power or cleaning level.
Select the timer , the cooking
V
time x , the end time y
time .
0
Reduce programmed values.
Increase programmed values.

Sensors to change the set values

With the @ or
can be changed.
= Increase programmed values.
@
= Reduce programmed values.
A
Ranges
30-270 Temperature
range
1-3 Grill power
Cleaning levels
1 sec. - 23:59 h.
1 sec. - 23:59 h.
Heating symbol
While the oven is heating up, the
display panel. When the oven is ready for your dish and
maintains its temperature the
The symbol never lights up for grill power and cleaning levels.
s

Inside the oven

There is a light inside the oven. A fan prevents the oven from
overheating.
Light
The oven light remains on while the oven is working. The light
switches off at set temperatures of less than 60 °C and during
the self cleaning function. This ensures optimum precision
control.
However, the light can be turned on without the oven being on
by setting the function control knob to
Fan
The fan can be turned on and off as necessary. The hot air
escapes through the top of the door. Warning! Do not cover the
vent. The oven could overheat.
The fan remains on for a certain length of time after the oven
has been switched off so that it can cool down more quickly.
and the
A sensors all fixed and recommended settings
The temperature inside the oven in
ºC.
The power levels of the small sur-
face grill %
grill .
$
1 = level 1, low
2 = level 2, medium
3 = level 3, high
The self-cleaning levels
1 = level 1, low
2 = level 2, medium
3 = level 3, high
Cooking time.
Time set on the timer.
symbol will be lit up on the
s
symbol will switch off.
s
N
and large surface
.
V
.
31