Steam Switch; Lack Of Water Indicator; Descaling Indicator; Drain Water Cap - Fakir RAPHAEL PLUS Bedienungsanleitung

GB BEFORE USE

Steam switch

The steam rate can be selected low, medium or high with one button operation. You
can select your desired steam rate by pressing the "Steam switch". And there are three
corresponding indicators to indicate the steam rate you have selected. The default
setting is low steam rate. Any one to be selected, its indicator will flash, after a few
minutes, the indicator will be changed to illuminating. At this time, the appliance can
produce steam and you can use the steam for ironing.

Lack of water indicator

If less water in the tank, the indicator will be illuminated, following with two "D" sounds
of buzzer, the steam generator stops working. It prompts you to add water into the tank.

Descaling indicator

If the descaling indicator illuminating, it indicates the steam generator shall be cleaned
by virtue of the mineral deposits collecting to a degree. When the system ensures the
mineral deposits have been removed, the indicator will be extinguished.

Drain water cap

Open the cap for cleaning the steam generator (see Fig. 4).

Cord clamp

When not in use, the iron cord and power cord shall be stored. Pull out the cord clamp
first, after winding the cord around the cord winding groove, push the cord clamp back.

Locking pin

The iron can be tightly secured onto the thermal insulating cushion by the locking pin.

Automatic power off

The appliance will be automatically turned off if no steam sprayed out from the
soleplate within 10 minutes.
22