Emptying The Water Tank; Clock Functions - Progress PBD3500X Benutzerinformation

Tank empty indicator
The indicator shows that the tank is
empty and must be refilled.
For more information refer to "Steam
Cooking".
Tank Full indicator
The indicator shows that the oven is
prepared for steam cooking.
If you put too much water into
the tank, the safety outlet moves
the excess water to the bottom
of the oven.
Remove the water with a
sponge or cloth.

Emptying the water tank

CAUTION! Make sure that the
appliance is cool before you
start to empty the water tank.
1. Prepare the draining pipe (C), included
in the same package with the user
manual. Put the connector (B) onto one
of the ends of the draining pipe.
2. Put the second end of the draining pipe
(C) into a container. Put it at a lower
position than the outlet valve (A).

CLOCK FUNCTIONS

Clock functions table
Clock function
Time of day
Minute Minder
Duration
End
3. Open the oven door and put the
4. Push the connector again and again
5. Remove the connector from the valve
Application
To set, change or check the time of day.
To set countdown time. This function has no effect on the opera-
tion of the appliance.
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
A
B
C
connector (B) into the outlet valve (A).
when you empty the water tank.
The tank can have some
water when the tank empty
indicator is on. Wait until
the water flow from the
water outlet valve stops.
when the water stops flowing.
Do not use the drained water to
fill the water tank again.
Progress 9