Service Data; Installation - Progress PBD3500X Benutzerinformation

Problem
Steam and condensation set-
tle on the food and in the
cavity of the oven.
There is water inside the
oven.
The indicator "Tank Full"
is off.
The indicator "Tank Empty"
is on.
The steam cooking does not
work.
The steam cooking does not
work.
It takes more than three mi-
nutes to empty the water
tank or the water leaks from
the steam inlet opening.

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING! Refer to Safety
chapters.
Possible cause
You left the dish in the oven
for too long.
There is too much water in
the tank.
There is not enough water in
the tank.
There is no water in the tank.
There is no water in the tank.
Lime obstructs the hole.
There are lime deposits in the
oven.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
Progress 25
Remedy
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
Deactivate the oven and wipe
the water with a cloth or
sponge.
Fill the tank with water until
the indicator comes on. If
water starts to come out in-
side the oven, and the indica-
tor is still off, contact a quali-
fied service engineer.
Fill the tank. If the indicator is
still on, contact a qualified
service engineer.
Fill the water tank.
Check the steam inlet open-
ing. Remove the lime.
Clean the water tank. Refer
to "Cleaning the water tank".