Skierg Warranty - Concept2 SKIERG Bedienungsanleitung

nspect the Fasteners
I
Be sure all fasteners are tight and have
not become loose during use. If your
SkiErg is wall mounted, examine the
wall mount fasteners carefully.
Inspect the Top Bracket Pulleys
Be sure the pulleys spin freely in the
pulley housings and that the pulley
housings swing freely in the pulley
brackets.
Pulley Housing
Pulley
As needed
• Clean surfaces of the SkiErg,
including floor or floor stand base,
with any non-abrasive household
cleaner. DO NOT spray any fluid
onto the PM.
• Dust and lint can collect inside
of the flywheel enclosure. This
buildup can restrict airflow reducing
the resistance of the fan. The outer
cover of the fan enclosure can be
removed for cleaning by removing
the four screws that hold the cover
together. See illustrations.
Flywheel Opening and Cleaning
1.
3.
5.
7.

SKIERG WARRANTY

Concept2 SkiErgs are backed by a limited 2 year and 5 year
warranty. For complete warranty information in the U.S. and
Canada, visit concept2.com/ski. For warranty information
outside the U.S. and Canada, contact the authorized Concept2
dealer in your territory. A list of authorized Concept2 dealers
can be found at concept2.com/international. If you do not find
a local dealer in your territory visit concept2.com/ski or email
info@concept2skierg.com.
6
2.
4.
6.
IMPORTANT:
The Performance Monitor
(PM) is a sealed unit. DO
NOT TAKE APART. Any
attempt to disassemble
will void warranty. Contact
Concept2 if there are
problems with the PM.