General; Safety - Fronius SnapINverter Serviceanleitung

General

General The "Service menus" are setup menus for installers and service engineers. The "Service
menus" are located at a separate menu level that can only be opened by entering an ac-
cess code.
The access code is provided by Fronius.
The following "Service menus" are described in these instructions:
-
-
-

Safety

IMPORTANT! If a status code is shown on the inverter display during the startup phase,
the "Service menus" can be opened by pressing the "Menu" button five times and then en-
tering the relevant access code.
Refer to the safety rules in the inverter operating instructions.
Service Basic menu
Service Error Counter menu
Service Pro menu
CAUTION! Incorrect settings can cause malfunctions and failures on the inverter.
Settings may only be made by trained and qualified personnel. Incorrect or omit-
ted settings will result in non-conformance with the standard.
53