Input Signal; Sms / Relay; Grounding Setting; Connection Type - Fronius SnapINverter Serviceanleitung

Input signal

Activation and setting of the input signal
Selection options
Mode of operation
Ext Sig.
S0-Meter
OFF
Triggering method
Ext. Stop
Warning

Connection type

N/C
N/O

SMS / relay

Selection options
Event delay
for entering the time delay after which an SMS is sent or the relay is to switch
Unit
Setting range
Event counter
for entering the number of errors after which an SMS is sent or the relay is to switch
Unit
Setting range
Grounding set- Activation and setting of the solar module ground
ting
Selection options
(1)
(2)
Grounding mode
for selecting the solar module ground
Selection options
60
Mode of operation / Triggering method / Connection type
(triggering method and connection type only visible by selecting
"Ext Sig.")
Signal input
Output of information from the meter in the household network
Mode of operation deactivated
In the event of a signal error, an external stop appears on the
display (interruption of feed-in).
In the event of a signal error, a warning appears on the display
at regular intervals (no interruption of feed-in).
Normally-open function
Normally-closed function
Event delay / event counter
s
900 - 86400
-
10 - 255
Grounding mode / Earth current watchdog
(2)
lay
only displayed if "Positive" or "Negative" is selected under Grounding mode
only displayed if "Warn Err" is activated
Off / Positive / Negative
(1)
/ Switch off de-