Mpp Tracker - Fronius SnapINverter Serviceanleitung

Temperature warning
TOTAL reset
The display of menu items depends on the respective country setup.

MPP Tracker 1

Setting the operating mode of MPP Tracker 1
Selection options
DC operating mode
Selection options
MPP AUTO
FIX
MPP USER
Dyn. Peak Manager
for activating or deactivating the Dynamic Peak Manager
Selection options
Fixed voltage
for entering the fixed voltage
Unit
Setting range
58
Threshold warning
a
Insulation fault
Threshold error
x ON
OFF
x CONFIRM
DC operating mode / Dyn. Peak Manager / Fixed voltage /
MPPT1 start voltage
MPP AUTO / FIX / MPP USER
normal operating status;
the inverter automatically searches for the ideal operating point
for entering a fixed DC voltage at which the inverter will operate
for entering the start voltage, at which the MPP tracker starts
searching for the optimal operating point.
ON / OFF
V
f,g,l
80 - 800
a
120 - 440
b,c,d,e,i,j
150 - 800
k
325 - 850
h
580 - 850
x 0.1 - 10
MOhm
0.5 - 10
MOhm
0.6 - 10 MOhm
a,g,i,j
1 - 10
MOhm
x ON
x
OFF
x
a
x 600 kOhm -
10000 kOhm
x
x
x
2)
b,c,d,e,h
2)
k
2)
2)
f,l
1)
3)
2)
1)
3)
5)