Mpp Tracker 2; Usb Logbook - Fronius SnapINverter Serviceanleitung

MPPT1 start voltage
for entering the MPPT1 start voltage
Unit
Setting range

MPP Tracker 2

Setting the operating mode of the MPP Tracker 2
Selection options
MPP Tracker 2
for activating/deactivating a 2nd MPP tracker
Setting range
DC operating mode
Selection options
MPP AUTO
FIX
MPP USER
Dyn. Peak Manager
for activating or deactivating the Dynamic Peak Manager
Selection options
Fixed voltage / start voltage
Fixed voltage value limits according to power stage set. Valid for MPP1 and MPP2
Unit
Setting range
MPPT2 start voltage
for entering the MPPT2 start voltage
Unit
Setting range

USB logbook

Activation or deactivation of the function that saves all error messages on the USB stick
Selection options
The "Auto" setting is reserved for future USB modifications and currently has a similar func-
tion to the "OFF" setting.
V
f,g,l
80 - 800
a
120 - 440
b,c,d,e,i,j
150 - 800
k
325 - 850
h
580 - 850
MPP Tracker 2 / DC operating mode / Dyn. Peak Manager /
Fixed voltage / MPPT2 start voltage
OFF / ON
MPP AUTO / FIX / MPP USER
normal operating status;
the inverter automatically searches for the ideal operating point
for entering a fixed DC voltage at which the inverter will operate
for entering the MPP voltage above which the inverter will
search for its ideal operating point
ON / OFF
V
Fronius Primo: 70 - 800
Fronius Symo: 150 - 800
Fronius Eco: Grid peak value: 850
V
80 - 800
150 - 800
ON/OFF/Auto
59