Specifications - Makita 4351T Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Cutting action changing lever
2-1. Switch lever
3-1. Speed adjusting dial
4-1. Tool opener
5-1. Blade clamp
5-2. Jig saw blade
5-3. Protrusions
6-1. Jig saw blade
7-1. Base
7-2. Hex wrench
8-1. Cutting line
8-2. Base
10-1. Base
10-2. Bolt
10-3. Hex wrench

SPECIFICATIONS

Length of stroke
Max. cutting capacities
Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model 4351T
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Explanation of general view
11-1. Graduation
11-2. Bevel slot
11-3. Base
11-4. Gear housing
11-5. V-notch
11-6. Bolt
12-1. Base
12-2. Bolt
12-3. Hex wrench
13-1. Starting hole
16-1. Dust nozzle
16-2. Base
18-1. Dust nozzle
18-2. Hose for vacuum cleaner
19-1. Rip fence
Model
Wood
Steel
Aluminum
-1
)
Overall length
Net weight
Safety class
) : 85 dB(A)
pA
4351T
26 mm
135 mm
10 mm
20 mm
2,800
271 mm
2.5 kg
ENE019-1
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745-2-11:
ENF002-1
Work mode : wood cutting
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : metal cutting
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model 4351CT, 4351FCT
For European countries only
ENG102-2
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
4
20-1. Hex wrench
20-2. Bolt
20-3. Fence guide
22-1. Fence guide
22-2. Threaded knob
22-3. Circular guide pin
24-1. Bolt
24-2. Rule bar
25-1. Screw
25-2. Guide rail adapter
25-3. Guide rail
26-1. Cover plate
26-2. Base
27-1. Base
27-2. Anti-splintering device
4351CT
26 mm
135 mm
10 mm
20 mm
800 - 2,800
271 mm
2.5 kg
/II
) : 96 dB(A)
WA
Wear ear protection
total value (tri-axial
2
) : 7 m/s
h,CW
2
) : 4.5 m/s
h,CM
2
) : 85 dB(A)
pA
) : 96 dB(A)
WA
4351FCT
26 mm
135 mm
10 mm
20 mm
800 - 2,800
271 mm
2.5 kg
ENG220-1
vector sum)
ENG304-1
2
ENG102-2