Assembly
Pull out the mains plug.
from electric shock.
1. Attach the carrying handle
2
2
feet using the cross-head screws
15),
vacuuming,
Never vacuum without a filter!
4
close it
sories.
Operation
13) before commencing work.
Switching on/off
Connect the mains plug.
Switching on the vacuum:
Switching off the vacuum:
16
2
16) for dry
17).
1
6
6
3) in position "I".
3) in position "O".
Nozzle usage
Floor nozzle (
tachment (
for wet and dry vacuuming of smooth sur-
Floor nozzle (
attachment (
and for removing persistent dirt.
•
Press the clips on the right and left side
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
for vacuuming gaps, corners and radiators.
1
1. For wet vacuuming or to vacuum wa-
-
- Before inserting, twist the edge of
2
14) into the water tank and suc-
tion up the water.
3. Empty the waste container immediately
after vacuuming because it is not de-
Maintenance").
Never reach into the water to
be suctioned up. Danger of
electric shock.
GB
IE
18) with insert at-
19):
18) without insert
19):
18) and remove
20):
Wet vacuuming
1
21
13) on the handle
NI
CY
19).
1
9