Sanitas SBC 53 Gebrauchsanweisung Seite 31

Press the M1 button if you have selected
user memory 1.
Press the M2 memory button if you have
selected user memory 2.
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (morn-
ing: 5.00 a.m. – 9.00 a.m.).
Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
When the relevant memory button (M1 or
M2) is pressed again, the last individual
measurement is displayed (in this example,
measurement 03).
When the relevant memory button (M1 or M2) is pressed
again, you can view your individual measurements.
• To switch the device off again, press the START/STOP
button .
If you forget to turn off the blood pressure monitor, it
will switch off automatically after 30 seconds.
You can exit the menu at any time by pressing the
START/STOP button
31
.