Spare Parts; Dismantling; Disposal - Maico EZQ .. B series Montage- Und Betriebsanleitung

Fault Cause, measure
Capacitor [3] not installed
EZQ.. B and
or installed incorrectly.
EZS.. B units:
Motor runs in
Connect capacitor [3]
the wrong
correctly ( chapter 7.2).
rotational or air
flow direction.
If the fault still continues or occurs
again, disconnect the fan from the
power supply at all poles.
Let a certified electrician determine
the cause of the fault and eliminate
it.

10. Spare parts

Spare parts may only be sourced from
and fitted by a specialist installer.
Item Spare parts available
1
Protective grille
2 Connection area cover
3 Capacitor
4 Motor
5
Strut incl. bracket [5.1]
6
Impeller
7
Wall plate (EZQ../DZQ..)
8
Steel wall ring (EZS../DZS..)
9 Cover
When ordering spare parts, please provide
the following details:
1. Print no. of these instructions 0185.0923.0006
2. Rating plate no., on side of rating plate
( unit  instructions envelope)
3. Item number
Should you have any questions
Maico Elektroapparate-Fabrik GmbH
Steinbeisstraße 20
78056 Villingen-Schwenningen,
Germany
Tel. +49 7720 694 445 / Fax +49 7720 694 175
e-mail: ersatzteilservice@maico.de
9. Fault rectification │ EN

11. Dismantling

Dismantling may only be undertaken
by a trained electrician ( chapter 1).
Danger to life from electric
shock.
DANGER
Prior to accessing the connec-
tion terminals, switch off all
supply circuits. Switch off the
mains fuse, secure against
being accidentally switched
back on and position a visible
warning sign.
1. Switch off mains fuse, secure and fit
warning sign.
2. Let the fan motor cool down and remove
the protective grille.
3. Remove the connection area cover [2].
4. Remove all cables.
5. Remove fan.

12. Disposal

Do not dispose of in domestic
waste. The unit contains in part
materials that can be recycled and in
part substances that should not end
up in the domestic waste.
Dispose of the unit once it has reached the
end of its service life according to the
regulations valid where you are.
19