How To Activate The Rinse Aid Dispenser; Acoustic Signals - Electrolux GA 55 LVSW Benutzerinformation

How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
and the display is blank.
2. Press
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
• The acoustic signals sound: e.g. 5
intermittent signals = level 5.
3. Press again and again to change
the setting.
4. Press the on/off button to confirm the
setting.
6.3 Use of rinse aid and multi-
tablets together
When you activate the option Multitab, the
rinse aid dispenser no longer releases
rinse aid. However if you are using multi-
tablets and the drying results are not
satisfactory, we suggest to use multi-
tablets and rinse aid together. In this case
you have to activate the rinse aid
dispenser.
The rinse aid dispenser will remain
activated until you modify the setting again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
and the display is blank.
and
,
start to flash
and
continues to
= level 5.
and
,
start to flash
2. Press .
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting:
deactivated.
3. Press
to change the setting.
= rinse aid dispenser activated.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs and
when you set the level of the water
softener. It is not possible to deactivate
these acoustic signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
and the display is blank.
2. Press
• The indicators
off.
• The indicator
to flash.
• The display shows the current
setting:
3. Press
setting.
ENGLISH
and
continues to
= rinse aid dispenser
and
,
start to flash
.
and go
continues
= Acoustic signal off.
to change the
9