Important Instructions For Safety And Environment; General Safety; Electrical Safety - Beko HCA91844XH Handbuch

Important instructions for safety and
1
environment
This section contains safety
instructions that will help protect
from risk of personal injury or
property damage. All warranties
will become void if you do not follow
these instructions.

1.1 General safety

Always have the installation and
•
repairing procedures carried out
by the Authorised Service Agent.
Manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorised persons.
This appliance is not intended
•
for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge.
Children should be supervised to
ensure that they do not play with
the appliance.

1.1.1 Electrical safety

Disconnect the product from
•
the mains during installation,
maintenance, cleaning and
repairing procedures.
Hood / User Manual
If the power cable is damaged,
•
it must be replaced by the
manufacturer, after sales service
or a similarly qualified person
(preferably an electrician) or
someone designated by the
importer in order to avoid possible
risks.
Operating voltage is 220 to 240
•
volts.
If the appliance has a failure, it
•
should not be operated unless
it is repaired by the Authorised
Service Agent. There is the risk of
electric shock!
Do not route power cable close to
•
hobs. Otherwise power cable may
cause fire since it melts down
easily.
Never plug the hood before
•
installation is completed.
In order to obtain the best
•
performance, external conductor
must not be longer than 4 m. It
must not contain more than 2
perpendicular (90°) angles and its
diameter must be min. ø120 mm.
Disconnect the appliance before
•
any intervention to the internal
parts of the appliance.
9 / 123 EN