Appendix B: Safety And Regulatory Notices - Optelec ClearView C Bedienungsanleitung

Optelec

Appendix B: Safety and Regulatory Notices

Please read the instructions carefully before setting up your ClearView C. Keep
this user manual for future reference.
 Use the ClearView C indoors. Do not expose the ClearView C to extreme or rapid
changes in temperature or humidity. Do not place the ClearView C near a radiator or
heater, or where it may be exposed to direct sunlight. These conditions may damage the
ClearView C's electronic or optical components.
 Do not place the ClearView C on an unstable surface. It may fall, causing serious
damage to the unit, or injury to the user.
 Firmly grip the monitor by the surrounding frame when positioning to ensure stability to
the entire system.
 The reading table, handle and the monitor adjustment contain movable parts. Please be
careful when adjusting the screen position, handle, or when operating the reading table
as to prevent fingers or any loose clothing from getting caught in the operating
mechanism. If you have difficulty operating the ClearView C safely, please seek
assistance or contact your Optelec distributor.
 When carrying the ClearView C using the handle, please make sure the monitor is moved
down to its lowest position, the reading table is locked and the handle is locked before
lifting the unit as to prevent fingers or any loose clothing from getting caught in the
operating mechanism. If you have difficulty operating the ClearView C handle safely,
please seek assistance or contact your Optelec distributor.
 Contact your Optelec distributor to service the ClearView C if necessary. Do not open
your ClearView C; this will void the warranty.
 When moving the ClearView C to another location, carry the ClearView C by gripping the
stand or using the integrated handle.
 Always switch the power off when the ClearView C is not in use.
 Always unplug the ClearView C before cleaning it. Use a soft cloth to clean the exterior
surfaces. Do not use any cleaning agents or any abrasive materials as these will damage
your ClearView C.
 Only use the cables provided with the unit.
Contacting Product Support
If you have questions about operating, installing or setting your ClearView C,
please contact your Optelec distributor or the Optelec office nearest to you.
See the last pages of this manual for a complete list of Optelec addresses.
Warranty Conditions
Optelec warrants the ClearView C, effective from the date of delivery, to be
free of any defects in material and workmanship.
The warranty is not transferable and does not apply to groups or multi-users.
The ClearView C was designed for the individual purchaser to be used at
home, school and work. Optelec reserves the right to repair or replace any
purchased ClearView C with a similar or improved product.
In no event shall Optelec or its suppliers be held liable for any indirect or
consequential damages. The original user's remedies are limited to
34
ClearView C
English