AGFEO T 18
Making a call
During the call, the display shows you the duration of the call.
Direct dial
In direct dial, the numbers are dialled immediately after you press the button and no correc-
tion is possible.
1. Lift the receiver and wait for the dial tone.
2. Enter the desired phone number using the keypad. The numbers pressed will be dis-
played and immediately dialled.
3. If instead of dialling numbers you press the redial button (
dialled will be dialled again.
4. End the call by replacing the receiver.
Dial with receiver on hook (advance
dialling)
In advance dialling, the numbers you press are only dialled when you lift the receiver.
1. Enter the desired phone number using the keypad.
2. Use the "Del" button (
3. Start the dialling process by lifting the receiver.
4. End the call by replacing the receiver.
Hands-free
Your AGFEO T 18 is equipped with a hands-free function.
– To make a call hands-free in advance, press the loudspeaker button (
ing the receiver.
– If you wish to switch to the receiver during a hands-free call, simply lift the receiver and
you can now continue the conversation using the receiver; the loudspeaker is switched off.
– If you wish to switch to hands-free during a call with the receiver, press and hold the loud-
speaker button (
– To end a hands-free call, press the loudspeaker button (
WARNING:
If you have a headset connected to your T 18, the hands-free function is deactivated and
pressing the loudspeaker button (
) to delete individual numbers.
) as you replace the receiver.
) will instead activate the headset.
), the phone number last
) instead of lift-
).
29