Language Selection
In the state of On-hook, do as follows:
– Press and hold DELETE button(
– While keeping on pressing DELETE button, press and hold CALL BACK button(
– Continuous to keep DELETE and CALL BACK buttons being pressed together, press arrow
up until current language setting shown on display.
– Use arrow buttons (
– Press CALL BACK button(
Time and Date Setting
- Press and hold SET button (
- Use arrow buttons (
- Press CALL BACK button (
- Press SET button (
Note
The Setting sequence is "Hour-Minute-Month-Day-Year-Weekday". The weekday is shown by
a number in the left side of the display (1=Monday...7=Sunday). After completion, the display
will show "TOTAL CALLS XX" and the name of the day.
When you receive the first incoming call, time and date will be automatically set if you have
FSK Caller ID service.
To make a call
To make a call, simply pick up the handset and wait for the dialling tone. Then, dial the
desired telephone number with the numeric keys.
To end a call, replace the handset onto the cradle of the base unit, or push the hook switch.
On-Hook Dialling
To Use On-Hook Dialling, you may enter the number to dial before or after pressing the
SPEAKER button(
one-touch memory, two-touch memory and redial list.
When the dialled number is answered, simply speak or pick up the handset to talk to the
other end.
) to select the language.
) to confirm and exit.
) to select the correct number.
) to confirm and move to the next digit.
) to exit.
) . On-Hook Dialling works with phone numbers stored in phone book,
)
) until the display shows "SET TIME".
)
E - 7