Save Phone Number; Delete Phone Number; Dial Phone Number; Factory Condition - AGFEO T 18 Bedienungsanleitung

AGFEO T 18

Save phone number

– With the receiver on the hook, press and hold the desired speed dial button (
than 3 seconds, until "ENTER NUMBER" appears in the display.
– Enter the phone number to be stored using the number buttons.
– If a number is already stored for this speed dial button, you can delete the old number by
pressing and holding the "Del" button (
– Delete individual digits by briefly pressing "Del" (
– Use the navigation buttons (
– Use the up/down navigation buttons (
– Enter the name using the keypad of the AGFEO T 18. Please consult "Input name via key-
pad" (see page 32).
– Press the speed dial button (

Delete phone number

– With the receiver on the hook, press and hold the desired speed dial button (
than 3 seconds, until "ENTER NUMBER" appears in the display.
– Hold the "Del" button (
leted.
– Press the speed dial button (

Dial phone number

To make a call using a number from the direct speed dial memory, press the desired speed
dial button ( ). The telephone automatically switches to hands-free mode and starts dial-
ling the phone number.

Factory condition

In factory condition, the following default settings are made in your AGFEO T 18:
Language
Contrast
Date
Time
PABX Prefix
Ringtone
To restore the unit to factory settings, press and hold the hash button (
6 seconds, then confirm by pressing "Ok" (
34
) to scroll through the digits.
) again to store changes.
) for at least 3 seconds; the stored phone number is now de-
) again to store changes.
English
3
01.01
00:00
----
01
) for at least 3 seconds.
).
) to navigate to the input field for the name.
Ringtone volume
Flash
T1
T2
T3
).
) longer
) longer
8
Short
000ms
000ms
000ms
) for at least